Circular Saw Blade Front & Back Angle Grinder
The CHC025A Circular Saw Blade Front & Back Angle Grinder.
* The front & back angle were grinded by one machine. Especially are
several machine tools can be operated simultaneously by one person。 They
are suitable for batch production. There are artificial procedure and
automatic process. It’s convenient for us to adjust the knife.
We can choose tooth forms from intelligence and ability interface. And
there are 16 kinds of tooth forms for us to choose. We can immediately
adjust to use (Flat tooth, LR, L bevel, R bevel, LRF, RLF, Trapezoidal
tooth, H L tooth, LLLR, RRRL, LRLRF, RLRLF, Triangular tooth, LFRF, LLLRF,
RRRLF).The seldom forms of tooth: such as left right flat and empty we
make it as a unit, and we can combine it discretionarily, and each team
could contain the teeth number amount to 20.
*LRLRF could take shape once, also the HL tooth; the trapezoidal flat tooth
should take shape two times.
*The speed of the grinding head’s running track begins to quickly descend,
but when it is closing to the knife head which automatically turn to slow.
And we can adjust the distance of the slow speed, the lowest point and
the speed of the slide board. The most quickly speed of grinding is 20
* The grinding head, Sliding platform (slide board), Rotary angle (left
right tooth), Separated tooth (setting tooth), Tightening of work piece,
etc. Those have the dustproof and waterproofing equipment, and out side
point to lubricate oil. The rotary angle oil pump, the separated tooth
oil pump and the oil pump of grinding head has quickly and slowly amortize
system; this could control the speed of the machine, insuring the
Hydraulic Pressure System running steadily. The PLC output adopts the band
two protection designs and the output point has a long life-span.
* The high level of Purchase Configuration.
Top & Face Angle grinder: This machine can grind the Top angle and face
angle. but two times finished. This machine has been improved to CHC026A.
Grinding the trapezoid tooth need one times to finished:left-right-flat.
At below you can check it’s parts
center hole(saw blade):10-220mm
grinding Tooth Pitch: 7-100mm
Weight:980KG Size: 165*135*183(cm)
026A's technical Parameter same as 025A. but some of it's parts differents:
principal axis adapts Japanese servo. And the part of electric is import
High Magnetic Saw Frame
To make sure the saw blade stablely, improve the grinding precision
Saw Clamping Device
Saw blade cramps can make the saw blade more tightening, and there is
another position cramps, to make the saw blade’s replace and regulate
Top teeth grinding